Foundry WorksFoundry Works

MADE IN CANADA

Metal Casting That Fits

We cast, machine, weld, and finish parts for manufacturers, architects, artists, and builders. Clear quotes, local lead times, and parts made to spec across Canada.

Book a consultationRequest a quote
Blue-hour foundry casting bay with sand mold, bronze bracket, crucible glow, and steam

Metric 01

350+

custom jobs completed

Metric 02

20+ yrs

metal shop experience

Metric 03

4.9/5

client rating from 214 reviews

HOW IT WORKS

Four Steps, Clear Plan

Short runs for fit tests, samples, and first builds.

Prototype aluminum and bronze castings in a steel fixture with sand fragments and drifting dust.

6-8 week lead

Prototype Castings

From $12,500

Short runs for fit tests, samples, and first builds.

Carved hardwood patterns drying on a sawdust-covered bench beside a shellac can and brass pins.

4-6 week lead

Pattern Making

From $8,500

Top-down view of split sand mold halves with wax runner and vent rods in a foundry setting.

4-6 week lead

Mold Design

From $9,500

Bronze flange after CNC machining beside a vise jaw and steel fixture plate in warm shop light.
012-4 week lead

CNC Machining

From $6,000

Tight-tolerance machining for faces, bores, and mounts.

Welded steel frame corners and clamps on a scarred table, smoke and dust in the air.
023-5 week lead

Fabrication Work

From $7,500

Welded frames, brackets, and support parts for builds.

Quenched metal coupons and a heat-tint ring cooling on refractory bricks in a foundry
031-3 week lead

Heat Treatment

From $5,500

Controlled heating and cooling for strength and wear.

SERVICES

Cast, Machine, Finish

Share drawings, samples, sizes, and the metal you need.

Alloy bars, cast test puck and machined flange ring on a stone slab with soft side light.
01

Send Part Details

Share drawings, samples, sizes, and the metal you need.

Bronze casting, sample circle, and swatches on a pale tray.
02

Quote And Plan

We review the job, confirm methods, and set the build plan.

Split wooden pattern, resin mold half, dowel pins, block plane and clamps on pale plaster
03

Make The Tools

Patterns, molds, and fixtures are built before the first pour.

Bronze casting samples on a stone tray with cloth, quenched part and teal patina accent.
04

Cast And Finish

We pour, machine, treat, and finish the parts for shipment.

PROJECTS

Built For Hard Use

Part drawing review One pattern set One alloy choice First sample pour Basic trim and clean

Billed per projectBilled per project

Starter

From $12,500

  • Part drawing review
  • One pattern set
  • One alloy choice
  • First sample pour
  • Basic trim and clean
Most popularBilled per project

Signature

From $31,500

  • Project review call
  • Pattern revision pass
  • Two test pours
  • CNC machining on key faces
  • Heat treatment on request
  • Blast, brush, or polish
Bid by scopeBid by scope

Scale

Custom

  • Large run planning
  • Multi-cavity mold work
  • Full machining package
  • Welded assembly support
  • Final surface finishing
  • Freight prep across Canada

WHAT CLIENTS SAY

Straight Answers, Clean Work

Cast and machined steel brackets for a bridge retrofit in Ontario.

Steel bridge brackets bolted under a concrete span in river mist

Civil Infra

Bridge Brackets That Held Tight

Cast and machined steel brackets for a bridge retrofit in Ontario.

Bronze hotel wall plaques and serif letters glowing in a stone niche

Architecture

Bronze Signs For A Hotel

Machined pump housings lined up on a concrete pallet inside a hazy plant bay.

Industrial

Pump Housings For A Plant

Cast rail posts and handrail along a pale stone gallery stair edge in soft daylight.

Hospitality

Rail Posts For A Gallery

Rain-slick bronze plaza sculptures with mist and wet reflections.

Public Art

Plaza Pieces In Bronze

Macro still life of a steel punch, layout squares and radio handset on a foundry workbench.

Job quotes and schedules

Mason Reid

Pattern-making still life with carved hardwood, shellac brush, brass pins, and a resin fillet sample.

Wood and resin patterns

Elena Varga

CNC inserts, collet chuck and aluminum fixture plate around a blue spacer on a machine table.

Tight-tolerance finishing

Noah Sinclair

Overhead tray of pyrometer rods, heat-tint coupons and stainless sample racks in a foundry bay.

Heat treat and surface finish

Priya Bains

Proof

Customer notes

Verified

“The first casting matched the drawing, and the finish saved us a second shop visit.”

Macro still life of a steel punch, layout squares and radio handset on a foundry workbench.

Dana Mercer

Plant Manager, Northfield Pump

Verified

“They kept us posted on every step and delivered bronze parts that lined up on site.”

Pattern-making still life with carved hardwood, shellac brush, brass pins, and a resin fillet sample.

Leo Bernier

Project Architect, Stone & Beam

Verified

“Our small art run came back clean, with the patina we asked for and no fuss.”

CNC inserts, collet chuck and aluminum fixture plate around a blue spacer on a machine table.

Mina Patel

Sculptor, Harbour Clay

Service area

Southern Ontario

Hamilton, Toronto, Mississauga, Oakville, Burlington

Toronto skyline and CN Tower above misty harbour water at dawn

Area 01

Southern Ontario

Hamilton, Toronto, Mississauga, Oakville, Burlington

Ottawa River mist at sunrise with Parliament Hill and bluffs above a calm open foreground.

Area 02

Ottawa Valley

Ottawa, Kanata, Nepean, Gatineau, Kingston

Old Quebec rooftops and a church spire glow above a hazy riverside slope at golden hour.

Area 03

Eastern Canada

Montreal, Laval, Quebec City, Sherbrooke, Trois-Rivières

Dusty Western Canada city edge with low roofs, concrete foreground and distant mountains at sunset.

Area 04

Western Canada

Winnipeg, Regina, Saskatoon, Calgary, Edmonton, Vancouver

The Map

Journal

Shop Notes

Questions

Common Questions

Quick answers before visitors choose a product, service, or next step.

01What metals do you cast?+

We cast bronze, aluminum, steel, and iron, then machine or finish the part to match the job spec.

02Do you handle small runs?+

Yes. We take one-off parts, test pieces, and short runs for product checks, site mockups, and art builds.

03Can you work from drawings?+

Yes. Send CAD files, sketches, or a sample part, and we will quote the shape, size, and finish you need.

04How long does a job take?+

Most jobs take 4 to 8 weeks, based on part size, metal choice, tooling, and machining steps after approval.

05Do you ship across Canada?+

Yes. We pack parts for safe freight and ship to shops, sites, studios, and plants across Canada.

06Can you add surface finish?+

Yes. We can grind, polish, blast, coat, or patina the part to match the look and use you want.

Shop Notes

Get short notes on casting tips, lead times, and shop updates. One email a month, no fluff.